Camera Support & Known Issues

Please read below for detailed technical specifications for Capture One PRO 6.3 as well as installation instructions.

Tethered Camera Support
Capture One 6.3 Pro/DB has tethered support for the following digital backs/cameras:

Phase One: IQ180 (preliminary), IQ160 (preliminary), IQ140 (preliminary), P 65+, P 40+, P 45+, P 30+, P 21+, P 25+, P 20+, Achromatic+, P 45, P 30, P 25, P 21, P20, H 25, H 20, H101, H 10, H 5, LightPhase 

Mamiya: DM56, DM40, DM33, DM28, DM22, M31, M22, M18
Leaf: Aptus-II 12 (64 Bit Only), Aptus-II 10R, Aptus-II 10, Aptus-II 8, Aptus-II 7, Aptus-II 6, Aptus-II 5, AFi-II 10, AFi-II 7, AFi-II 6

Additionally Capture One 6.3 Pro has tethered support for the following cameras:

Leaf: Aptus 75S, Aptus 65S, Aptus 54S, AFi 7, AFi 6, AFi 5, Aptus 75, Aptus 65, Aptus 22, Aptus 17
Canon: IS Mark IV, 1Ds Mark III, 1D Mark III, 5D Mark II, 7D, 60D, 50D, 40D, 550D/Rebel T2i, 500D/Rebel T1i, 450D/Rebel XSi, 1000D/Rebel XS. Some older Canon models may work to some extent but no support is provided for these.
Nikon: D3s, D3x, D3, D700, D300, D300s, D200, D90, D80, D60, D5000, D40x, D40.

The extent of tethered support will vary depending on the back/camera connected.

 

RAW File Support
Capture One 6.3 DB supports RAW files from the following digital backs/cameras:

Phase One: IQ180 (preliminary), IQ160 (preliminary), IQ140 (preliminary), P 65+, P 40+, P 45+, P 30+, P 21+, P 25+, P 20+, Achromatic+, P 45, P 30, P 25, P 21, P20, H 25, H 20, H101, H 10, H 5, LightPhase 
Mamiya: DM56, DM40, DM33, DM28, DM22, M31, M22, M18
Leaf: Aptus-II 12 (preliminary, 64 bit only), Aptus-II 10R, Aptus-II 10R, Aptus-II 10, Aptus-II 8, Aptus-II 7, Aptus-II 6, Aptus-II 5, AFi-II 10, AFi-II 7, AFi-II 6

Additional Capture One 6.1 Express/Pro supports RAW files from the following digital backs/cameras:

Leaf: Aptus 75S, Aptus 65S, Aptus 54S, AFi-7, AFi 6, AFi 5, Aptus 75, APtus 65, Aptus 22, Aptus 17
Mamiya: MZD, ZD Back
Canon: 1D Mark IV, 1Ds Mark III, 1D Mark III, 1D Mark II N, 1Ds Mark II, 1D Mark II, 1Ds, 1D, 7D, 5D Mark II, 5D, 60D, 50D, 40D, 30D, 20D, 10D, 550D/Rebel T2i, 500D/Rebel T1i, 450D/Rebel XSi, 400D/Rebel XTi, 350D/Rebel XT, 300D/Rebel, 1000D, D60, D30, Pro 1, G11, G10, G9, G6, G5, G3, G2, S95, S90
Epson: R-D1s, R-D1
Fuji: S5 Pro, S3 Pro, S2 Pro
Konica Minolta: Alpha 5 D / Maxxum 5 D / Dynax 5 D, Alpha 7 D / Maxxum 7 D / Dynax 7 D, A1, A2
Leica: M9, M8, X1,D-LUX 5, D-LUX 4, Digilux 3, Digital Module R for R8 and R9 cameras
Nikon: D3s, D3X, D3, D2Xs, D2X, D2Hs, D2H, D1X, D1H, D700, D300s, D300, D200, D100, D90, D80, D70s, D70, D60, D50, D40X, D40, D7000, D5000, D3000, P6000
Olympus: E-620, E-3, E-520, E-510, E-450, E-P1, E-PL1 E-P2, E-420, E-410, E-500, E-1, E-10, E-20, E- 30, E-330, E-300, E-400, C-7070, C-8080
Panasonic: DMC-GF2 (preliminary), DMC-GH2 (preliminary), DMC-G2, DMC-G10, DMC-FZ100, DMC-FZ45, DMC-G1, DMC-GH1, DMC-GF1
Pentax: K-5, K-R, K20D, K10D, K7, KX, K200D, K110D, K100D Super, K100D, K2000/K-m, *istDL2, *istDL, *istD, *istDS2, *istDS (Only PEF files supported) 
Sony: DSLR-A900, DSLR-A850, DSLR-A700, DSLR-A550, DSLR-A500, DSLR-A380, DSLR- A350, DSLR-A330, DSLR-A300, DSLR-A230, DSLR-A200, DSLR-A100, DSC-R1
Adobe: DNG 1.2 (raw DNG support only). The DNG support is not optimized for specific cameras.

 

Known Issues Based on Camera System

All Users

  • When you have disconnected a camera do not reconnect a camera until the Camera tool status changes to "No Camera Attached."


DSLR Users

  • Setting the White Balance on a connected camera from the Camera tool is supported for Phase One Digital Backs and selected Mamiya Digital Backs only. It is not available for Canon and Nikon DSLR cameras.
  • For Canon 1D Mark II, 1Ds Mark II, 1D Mark II N: These cameras only support remote capture via the Firewire port. Clear any messages on the LCD panel of the camera before connecting the camera, otherwise capturing will be disabled.
  • For Canon 5D Mark II, 5D, 20D, 500D/rebel T1i, 450D/Rebel XSi, 400D/Rebel XTi, and 350D/Rebel XT: Set the camera's communication setting to PC connection or Normal to enable remote capture. Do not use the Print/PTP or PTP setting.
  • Connecting some Canon cameras to the computer after launching Capture One might result in tethered capture being unavailable. If you experience this, connect the camera to the computer prior to launching Capture One.


Back Users

  • For tethered shooting with Phase One Digital Backs make sure that your system can either supply at least 10W power via Firewire (more than most laptops can supply) or make sure to activate the "Force Battery" setting on the back. Use the 4.5m Phase One Firewire cable.
  • For tethered shooting with Leaf and Mamiya DM digital backs make sure that your system can supply at least 12W power via Firewire (more than most laptops can supply). Use a Leaf or Mamiya Firewire cable.
  • Do not open the shutter on the camera prior to opening the LIve View window. Doing so will generate errors on the digital back after closing the LIve View window, then open the shutter on the camera, use Live View as desired, when done, close the shutter on the camera, and close the Live View window.
  • For Leaf Backs and Mamiya DM systems, the camera body must be selected in the preferences before connecting the back.
  • For Leaf Backs and Mamiya DM systems, in case of a communication error during firmware upload, please wait 10 minutes before disconnecting the FireWire cable.
  • Leaf Aptus II 8 only works with black and white live view.

 

Known Issue - Based on Operating System


All Users

  • Sessions are not cross platform compatible.
  • Browsing folders containing unsupported image files may affect application performance.
  • Image Previews created with a version prior to Capture 4.7 will be updated with Capture One 6.3. The first time you access folders with existing Capture one previews the application performance can be slow.
  • Presets made with Capture One 6.3 are not compatible with older versions of Capture One.
  • Using e.g. a US laptop keyboard it might be preferable to change come of the standard keyboard shortcuts.


Mac Users

  • Certain versions (e.g. 2.4) of the Logitech Control Center may conflict with the tethered capture functionality of Capture One. We strongly recommend upgrading to the latest version of the Logitech Control Center.
  • It is only possible to show the Capture one toolbar in “Icon Only” mode.


Windows Users

  • Library tool cannot be closed or moved from the default tab.
  • Windows drivers are required for some older models of Canon DSLY cameras to be able to shoot tethered. These drivers are available from Canon’s web site.
  • Windows 7 may switch off Firewire power when the Firewire has been inactive for more than 2 minutes. Please refer to hotfix: http://support.microsoft.com/kb/2173749 for a solution to this issue.
  • If you have Bonjour 2.0.3 installed you may experience problems with Capture Pilot. Bonjour 2.0.2 (shipping with Capture One 6) and 2.0.3 (shipped with iTunes) have been tested to work with Capture Pilot. To check the version number of Bonjour, go to ‘Control Panel’ and select ‘Programs and Features’ (Add/Remove Programs on WinXP)