Technical Specifications

Known Issues in Capture One 5.1.2

Below you will find a list of known issues for Capture One 5.1.2 at the time of shipping.

General: 

• Live Preview for P 65+ and P 40+ requires a Digital Back firmware update, which enables Live Preview support. 
• Using a large preview image size will affect performance.
• ICC version 4 profiles and some ICC version 2 profiles are not supported for Mac OS Leopard, Windows 7, and Windows Vista.
• Setting the white balance on a connected camera from the Camera tool is supported for Phase One Digital Backs and selected Mamiya Digital Backs. It is not available for Canon and Nikon DSLR cameras. 
• Sessions are not cross platform compatible. 
• For Canon 1D Mark II, 1Ds Mark II, 1D Mark II N: These cameras only support remote capture via the FireWire port. Clear any messages on the LCD panel of the camera before connecting the camera, otherwise capturing will be disabled. 
• For Canon 5D Mark II, 5D, 20D, 500D/Rebel T1i, 450D/Rebel XSi, 400D/Rebel XTi, and 350D/Rebel XT: Set the camera’s communication setting to PC connection or Normal to enable remote capture. Do not use thePrint/PTP or PTP setting. 
• Browsing folders containing unsupported image files may affect application performance.  
• Image previews created with a version prior to Capture 4.7 will be updated with Capture One 5.1.2. The first time you access folders with existing Capture One previews the application performance can be slow. 
• Presets made with Capture One 5.1.2 may not be compatible with older versions of Capture One.
• Do not open the shutter on the camera prior to opening the Live Preview window. Doing so will generate errors on the digital back after closing the Live Preview window. The recommended procedure for using Live Preview is to first open the Live Preview window, then open the shutter on the camera, use Live Preview as desired, when done close the shutter on the camera, and close the Live Preview window.
• For Leaf backs, the camera body must be set in preferences before connecting the back.
• When using a Leaf back in a tethered setup, please make sure to use a FireWire interface that can supply at least 12W of power and a Leaf FireWire cable.
• When attaching a Leaf back to a computer with Capture One running, firmware update may start automatically. Do not interfere with this process that may take a few minutes.
• For Leaf files, LCC is currently not supported. If needed the files can be corrected using Leaf Capture’s Lens Calibration feature first and then taken to Capture One.
• For Leaf backs, Capture One only supports shooting tethered to compressed files.  

Mac: 

• Shooting tethered with some Canon cameras on Mac OS 10.6.2 may for some hardware configurations, sporadically hang the application during image transfer for up to about 2 minutes. No such issues have been observed on Mac OS 10.5.8.
• When you have disconnected a camera do not reconnect a camera until the Camera tool status changes to "No Camera Attached". 
• Certain version (e.g. 2.4) of the Logitech Control Center may conflict with the tethered capture functionality of Capture One. We strongly recommend upgrading to the latest version of the Logitech Control Center.
• It is only possible to show the Capture One toolbar in “Icon Only” mode.
• Using e.g. a US laptop keyboard it might be preferable to change some of the standard keyboard shortcuts.

Windows: 

• Library tool cannot be closed or moved from the default tab. 
• Windows drivers are required for some older models of Canon DSLR cameras to be able to shoot tethered. These drivers are available from Canon’s web site. 
• Connecting some Canon cameras to the computer after launching Capture One might result in tethered capture being unavailable. If you experience this, connect the camera to the computer prior to launching Capture One.

New Tethered & File Support in Capture One 5.1.2

Tethered Camera Support
Capture One 5.1.2 PRO/DB has tethered support for the following digital backs/cameras:

Phase One: P 65+, P 40+, P 45+, P 30+, P 21+, P 25+, P 20+, Achromatic+, P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 101, H 10, H 5, LightPhase

Mamiya: DM56, DM40, DM33, DM28, DM22, M31, M22, M18

Leaf: Aptus-II 10R, Aptus-II 10, Aptus-II 8, Aptus-II 7, Aptus-II 6, Aptus-II 5, Afi-II 10, Afi-II 7, Afi-II 6.

Additionally Capture One 5.1.2 PRO has tethered support for the following cameras:

Leaf: Aptus 75S, Aptus 65S, Aptus 54S, Afi 7, Afi 6, Afi 5, Aptus 75, Aptus 65, Aptus 22, Aptus 17

Canon: 1D Mark IV, 1Ds Mark III, 1D Mark III, 1D Mark II N, 1Ds Mark II, 1D Mark II, 5D Mark II, 5D, 7D, 50D, 40D, 30D, 20D, 550D/Rebel T2i, 500D/Rebel T1i, 450D/Rebel XSi, 400D/Rebel XTi, 350D/Rebel XT, 1000D/Rebel XS

Nikon: D3s, D3X, D3, D700, D300, D300s, D200, D90, D80, D60, D5000, D40x, D40

The extent of tethered support will vary depending on the back/camera connected. In particular, Live View/Preview is only supported on selected Phase One and Mamiya backs.

RAW File Support
Capture One 5.1.2 DB supports RAW files from the following digital backs/cameras:

Phase One: P 65+, P 40+, P 45+, P 30+, P 21+, P 25+, P 20+, Achromatic+, P 45, P 30, P 25, P 21, P 20, H 25, H 20, H 101, H 10, H 5, LightPhase

Mamiya: DM56, DM40, DM33, DM28, DM22, M31, M22, M18

Leaf: Aptus-II 10R, Aptus-II 10, Aptus-II 8, Aptus-II 7, Aptus-II 6, Aptus-II 5, Afi-II 10, Afi-II 7, Afi-II 6.

Additionally Capture One 5.1.12/ 5.1.2 PRO supports RAW files from the following digital backs/cameras:

Leaf: Aptus 75S, Aptus 65S, Aptus 54S, Afi 7, Afi 6, Afi 5, Aptus 75, Aptus 65, Aptus 22, Aptus 17

Mamiya: MZD, ZD Back

Canon: 1D Mark IV, 1Ds Mark III, 1D Mark III, 1D Mark II N, 1Ds Mark II, 1D Mark II, 1Ds, 1D, 7D, 5D Mark II, 5D, 50D, 40D, 30D, 20D, 10D, 550D/Rebel T2i, 500D/Rebel T1i, 450D/Rebel XSi, 400D/Rebel XTi, 350D/Rebel XT, 300D/Rebel, 1000D, D60, D30, Pro 1, G11, G10, G9, G6, G5, G3, G2, S90

Epson: R-D1s, R-D1

Fuji: S5 Pro, S3 Pro, S2 Pro

Konica/Minolta: Alpha 5 D / Maxxum 5 D / Dynax 5 D, Alpha 7 D / Maxxum 7 D / Dynax 7 D, A1, A2

Leica: M9, M8, D-LUX 4, Digilux 3, Digital Module R for R8 and R9 cameras

Nikon: D3s, D3X, D3, D2Xs, D2X, D2Hs, D2H, D1X, D1H, D700, D300s, D300, D200, D100, D90, D80, D70s, D70, D60, D50, D40X, D40, D5000, D3000, P6000

Olympus: E-PL1, E-620, E-3, E-520, E-510, E-450, E-P1, E-P2, E-420, E-410, E-500, E-1, E-10, E-20, E- 30, E-330, E-300, E-400, C-7070, C-8080

Panasonic: G1, GH1, GF1

Pentax: K20D, K10D, K7, KX, K200D, K110D, K100D Super, K100D, K2000/K-m, *istDL2, *istDL, *istD, *istDS2, *istDS (Only PEF files supported)

Sony: DSLR-A900, DSLR-A850, DSLR-A700, DSLR-A550, DSLR-A500, DSLR-A380, DSLR- A350, DSLR-A330, DSLR-A300, DSLR-A230, DSLR-A200, DSLR-A100, DSC-R1

Adobe: DNG (raw DNG support only). The DNG support is not optimized for specific cameras.

Download Capture One 5.1.2 for Mac Apple® Macintosh®: • Intel-based Macs • 2 GB of RAM • At least 10 GB of free hard disk space • Calibrated color monitor with 1280 x 800, 24 bit resolution at 96dpi screen ruling • Mac OS X 10.6, 10.5.8 or later • Flash is required to view the video on the Welcome Screen. • For Phase One digital back users, the application can be run in the “Capture One digital back only” mode. The application is fully functional in this mode and doesn’t require activation or an Internet connection.

Download Capture One 5.1.2 for Windows • Intel® Pentium® 4 or better  • 2 GB of RAM • At least 10 GB of free hard disk space  • Calibrated color monitor with 1280 x 800, 24 bit resolution at 96dpi screen ruling • Windows XP® SP3, Windows Vista® SP2, Windows 7® • Microsoft® .NET Framework version 3.5 Service Pack 1 Redistributable package      • In case you do not already have this installed, Capture One will initiate installation of this for you. • A PDF reader is needed to access the help file. • Flash is required to view the video on the Welcome Screen.

The above hardware specifications is to be considered as minimum requirements, if you work with high resolution camera systems or simply want to optimize the performance, please follow the recommendations below:

• Using processor with multiple cores, e.g. Intel CoreTM Duo or better
• Having 4 GB of RAM or more
• Plenty of hard disk space for your images!
• A fast hard disk!

For tethered shooting with Phase One digital backs, ensure that your system complies with the following recommendations:

• Sufficient Firewire power supply, i.e. 10W is required, which is more than what many laptops are able to supply.
• Activate “Force Battery” setting in Digital Back when using host computer with insufficient Firewire power supply.
• Use the 4.5 m Phase One Firewire cable

Explanation of Installers

Please note there is only one installer regardless of the version you intend to use. After installation the software will give you activation options.

If you are using the Trial Period there are two options: Capture One and Capture One Pro. Capture One is a limited edition of the software. If you are looking for the full Pro version, be sure to select Capture One Pro.

If you are a Phase One Digital Back owner, you may now use the software without an activation code. Select Use Capture One DB and you can start working right away. The only limitation of this software is that it will not work with DSLR files or tether to DSLR cameras.

If you are interested in using Capture One Pro you can enter a code you already own or purchase one via the Digital Transitions web site.

Activation/Deactivation: Capture One 5.x allows you to activate and deactivate through the software. This process gives you freedom to easily switch from computer to computer.
To deactivate:
Go to Capture One>License
Select the code, click Deactivate.

Click the check mark to agree then click Deactivate.

To Reactivate, select the code then press Activate. Please note that you do need an Internet connection to reactivate.

You can use your Capture One Pro key with Capture One 3.7.x and Capture One 5.1.2 simultaneously.

Installation

If you previously have installed versions of Capture One 4 on your computer we recommend that you start by uninstalling these before you install this version of Capture One 4. If you want to keep your existing versions of Capture One 4 you can install this newer version of Capture One 4 in a different location. Image settings made with older versions of Capture One 4 can be used in the newer Capture One 4.5.x, but the opposite is not the case.

Install on Windows:

Capture One includes an easy-to-use installer that will install all the software you need to run the application on a Windows based computer.

To install the software, please follow the procedure below:
1. Load the Capture One DVD, or download the application from our web site
2. Run the executable software install file.
3. Read and accept the license agreement when presented.
4. Follow the on-screen instructions to complete the installation.

Install on Mac OS X:

Capture One includes an easy-to-use installer that will install all the software necessary to run the application on Mac OS X.

To install the software, please follow the procedure below:
1. Load the Capture One DVD or download the application from our web site
2. Open the Capture One disk image.
3. Read and accept the license agreement when presented.
4. Drag the Capture One icon to the Applications folder.
5. Start the Capture One application from your Applications folder.
6. If you have a previous version of Capture One 4, please delete the Capture One preferences file located in the User Library Preferences folder.